Commercial Garage Doors
& loading docks

We provide the utmost care and attention to our client’s garage and loading dock needs through quality workmanship, excellent products and outstanding customer service. Browse commercial garage and loading dock products below and request a free consultation for your business in the Southeastern MA and RI areas.

omega logo
Omega makes durable protective products for keeping your commercial loading dock safe from damage. 
mp_omega_trak_shield
mp_omega_door_guard
mp_omega_goal_post_door_safety

Trak Guards

Omega Trak-Shield™ is our specialty product, known in the industry for its ability to offer maximum overhead door track protection with minimal installation — at a fraction of the cost of the most common alternatives. The Trak-Shield™ door guards install directly into the building floor in minutes, and offer protection without interfering with the heavy duty overhead doors normal operation.

Only Omega Trak-Shield™ Overhead Door Guards offer your company these advantages:

  • Maximum protection without interfering with normal door operation
  • Easy installation
  • Protection against both front and side heavy duty impacts
  • Increased durability and cost-effectiveness when compared with structural options
  • Easy replacement if damaged
  • OSHA-approved color scheme to create a highly visible warning to drivers even under low lighting conditions

Door Guards

Our economically designed Z-Guard™ attaches directly to the building, so it can offer maximum protection against impacts. The Trak-Shield™ is similar in design and functionality to the Z-Guard™ shield door guards, because they are easy to install, highly visible, and can be easily replaced if damaged extensively.

  • Provides maximum track protection without interfering with normal door operation
  • Anchors to the interior building wall for easy installation
  • Heavy-duty, design wraps around the door track to protect against front and side forklift impacts
  • More durable and cost-effective than conventional pipes and embedded concrete bollards
  • Easy to replace, if damaged by a forklift
  • Attractive, highly visible and OSHA-approved. Omega Traffic Safety Yellow finish

Goalpost Door Safety

Omega’s goalpost door safety systems offer maximum protection without interfering with normal door operation. They are easy to install and can protect against both front and side heavy-duty impacts.

Door safety systems include:

  • 120″ x 120″ Goal Post Door Guard System
  • 96″ x 120″ Goal Post Door Guard System
  • 144″ x 144″ Goal Post Door Guard System
  • 96″ x 96″ Goal Post Door Guard System

Goalpost door systems deliver increased durability and cost effectiveness when compared to structural options. An OSHA-approved color scheme creates highly visible warnings to drivers even under low lighting conditions.

Perma Tech loading dock providers in southern MA

Perma Tech is grounded in superior craftsmanship and is committed to the highest level of customer satisfaction. The company designs and manufactures high quality, innovative loading dock products for our business partners that, consequently, improve safety, productivity, and energy savings. We sell and install Perma Tech loading dock products in the Fairhaven, MA area. 

loading dock garage door installation for MA and RI

Foam Head Member

This 12″ wide foam filled wood backed head member is standard on Perma Dock Seals for doors less than 9’0″ high. It delivers three sided foam protection that provides the most effective seal at the loading dock door.

Extra wide head members, 18″ to 30″, are available to allow varied truck height coverage. Chain-weighed drop flaps sewn to the foam head pad service an occasional lower truck and can be held out of the way with velcro fasteners.

Loading Dock overhead door installation services in MA

Standard Rigid Shelter

Perma Tech’s Rigid Dock Shelter is designed to service a variety of truck sizes and types, regardless of dock door size. As the truck backs into the shelter, the face curtains wrap around the truck sides, therefore ensuring positive weather protection, yet allowing for full truck opening accessibility and accommodating both 8’0″ and 8’6″ wide trailers.

A rigid framework combined with a wide range of curtain fabrics make Perma’s Rigid Shelter suitable for even the heaviest traffic application. Fiberglass stays sewn into the face and the curtains hold snug against the truck while the foam filled bottom cushions prevent bottom draft.

Perma Tech sews extra heavy duty wear areas at all the critical truck contact points and uses only pressure treated lumber to give you a unit that’s built to last. Steel frames are optional. Face curtains on Prema’s Rigid Dock Shelter wrap around the back of a trailer, due to reduced energy loss and positive weather protection.

Perma Tech’s experience in the Dock Shelter industry guarantees you performance and lasting quality.

Cornell garage door logo
mp_rolling_counter_door3
Counter Shutter | Model Number: ESC10 and ESC20 (with frame and sill)
mp_glidegard_side_folding_grilles1
Side Folding Grilles | Model Number: ESG32

ROLLING COUNTER DOOR

Commonly utilized in cafeterias, concession stands and ticket booths, our Rolling Counter Doors provide accessibility and security in interior and exterior finished wall openings. These doors are manufactured with smaller, more aesthetically pleasing components – such as the guides, slats, brackets and hood – than traditional rolling doors. They require minimal headroom and, as a result, they can be custom-fit into a wide variety of openings.

GLIDEGARD™ SIDE-FOLDING GRILLES

A heavier duty side-folding grille, GlideGard™ provides enhanced security in applications where more robust supporting structures are available. Our vandalism-resistant design is useful for use in applications such as food courts, schools, sports complexes and public transit.

mp_rolling_service_door3
Service Doors | Model Number: ESD10

ROLLING SERVICE DOOR

When you need an interior or exterior overhead door that is secure, durable, customizable and compact – you need a rolling door. Our overhead service doors feature a rugged design manufactured with quality materials that lower the total cost of ownership. And, because we custom build each roll up door to your exact aesthetic specifications, we can create a rolling door that seamlessly fits into your existing designs.

As the rolling service door industry leader, Cornell has many overhead coiling doors to meet your needs. Whether you are in need of an exterior door, security door or insulated door, all our overhead rolling doors are custom made to your specifications. Rolling service doors are available in a variety of materials, finishes, gauges and options. Due to our overhead coiling door design, your overhead garage door safely stores up and out of the way.

Rolling steel doors are metal slatted doors that roll up to store in coil above the opening. They are used to provide security against entry or weather protection at exterior and interior openings in industrial, commercial, institutional and other buildings. They are also called overhead coiling doors or service doors.

mp_insulated_rolling_door1
Insulated Doors | Model Number: ESD20

THERMISER® INSULATED ROLLING DOOR

Thermiser Insulated Rolling Doors, designed for exterior use, help maintain different temperatures on each side of the door. They are an ideal choice for use in environments that require climate control, security and durability, such as distribution, industrial, hospitality, retail and more.

Thermiser doors store compactly, require little to no maintenance and deliver a low life cycle cost. In fact, we warranty this product for 50,000 cycles as standard.

Foamed in place insulation offers superior protection against the elements, improved security and reduced sound transmission. The Thermiser helps seal the building envelope and keeps noise in – or out.

Sound Transmission Class (STC) rating is up to 30 for the curtain and up to 18 for the entire assembly. If an STC of 32 is desired, additional options are required. Please consult the factory for details. All configurations are evaluated per ASTM E90, based on testing a complete, operable assembly.

Hormann logo

Perma Tech, grounded in superior craftsmanship and committed to the highest level of customer satisfaction, designs and manufactures high quality, innovative loading dock products for our business partners that improve safety, productivity, and energy savings.

commercial garage door installation company in MA

Speed-Guardian™ 5000 LS Low Speed Series

The Speed-Guardian™ 5000 LS low speed series of high performance rigid panel doors matches the looks of the high speed, Speed-Guardian™ 5000 models, but is priced considerably lower. The 5000 LS has all of the same aesthetics as the Speed-Guardian™ 5000 high speed models, such as 1-5/8″ insulated panel and double-pane windows with Duratec® protective coating, but is less expensive and has operating speeds of 8″ per second, allowing building owners to realize a savings for door openings where low cycles will exist; where they want to have the look of the high speed Speed-Guardian™, but don’t need the high speed operation.

The standard lift model 5000 LS uses a trolley motor with 15,000 springs for operation. High cycle springs up to 100,000 cycles are available for higher use applications. A jackshaft motor is used with the optional high lift and vertical lift track configurations.

  • Speed-Guardian™ SG 5000 LSS Standard lift tracks
  • Speed-Guardian™ 5000 LS CV Standard lift tracks – CV panel
  • Speed-Guardian™ 5000 LS H High lift tracks
  •  
  •  Speed-Guardian™ 5000 LSH CV High lift tracks – CV panel
  • Speed-Guardian™ 5000 LS V Vertical lift tracks
  • Speed-Guardian™ 5000 LS V CV Vertical lift tracks – CV panel
  • Speed-Commander™ Series

    commercial overhead door electric

    Interior Door Openings

    The Speed-Commander™ 1400 SEL comes in a sectional panel design. The panels are connected using aluminum profiles and have specially designed edges that allow the panels to slide easily into the horizontal aluminum profiles for fast replacement.

    Standard on the Speed-Commander™ 1400 SEL is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment at the doorway, as compared to other doors that use only photocells. Full perimeter draft seals provide dust and odor containment, as well as general environmental control.

    The Speed-Commander™ 1400 SEL comes with the next generation, Smart Start™ NXT NEMA 4X control box, which accepts 208 v to 575 v / 3-phase / 60 Hz input voltage. The updated control box has a simplified wiring configuration, is more powerful, and has fewer components and cables as compared to the original Smart Start™. Single-phase control box is optional and has our Smart Start™ NXT wiring but with a NEMA 3 rated control box (1-phase, 230 v only).

    commercial electric overhead doors

    Clean-Master 20 Pa for Clean Rooms

    The Speed-Commander™ 1400 SEL Clean-Master 20 Pa tightly seals door openings in clean room applications to prevent air movement, and the fast opening speed of up to 80″ per second greatly increases protection from contamination between two areas. Low-profile steel guide tracks are free of moving parts, promoting a pure environment. Stainless steel guide tracks are available for customers that demand the ultimate in clean.

    Standard on the Clean-Master 20 Pa is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells. The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime. The absence of a coil cord eliminates a possible source of contaminants.

    A special UPS emergency battery pack is an option that provides peace-of-mind in case of a power failure. If power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area. This low maintenance design is free of springs, counterbalance systems and other high maintenance parts that are typically required for emergency opening. When the battery is low, an alarm sounds to signal time for a replacement. Replacing the battery is a simple process that takes just a few minutes. This option is only available with doors equipped with our 230 v / 1-phase control box.

    overhead door for loading dock MA RI

    Cool-Master for Coolers

    This is the ideal door for energy conscious, 24/7/365 applications in agricultural, medical and cooler distribution facilities. The fast operating speeds allow for a constant flow of traffic without compromising energy control and efficiency. An advanced 3 mm thick gray foam panel material maintains flexibility to +33 degrees F and helps to keep condensation to a minimum in cooler to ambient areas. Our unique sectional panel design makes it possible to replace panels easily for minimal downtime.
    Standard on the Cool-Master is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells. The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime. Full perimeter draft seals provide additional environmental control.
    The Cool-Master comes with the next generation, Smart Start™ NXT NEMA 4X control box, which accepts 208 v to 575 v / 3-phase / 60 Hz input voltage. The updated control box has a simplified wiring configuration, is more powerful, and has fewer components and cables as compared to the original Smart Start™.
    loading dock overhead door repair and installation in MA

    Food-Master for Food Processing

    The Food-Master design allows you to select only the stainless steel options your application requires. Able to conform with all industry requirements, the following components are available in stainless steel, making it possible to conveniently build a Food-Master door without paying for unnecessary stainless options: Roll tube / shaft, door / motor cover, guide tracks and all hardware.

    Standard on the Food-Master is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells. The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime. Amazingly, the light grid remains an effective protection device even following wash-down.

    Two effective panel materials are available on the Food-Master. The standard is a 40 oz. / sq. yard white nylon-reinforced, puncture resistant PVC, perfect for basic applications. An optional 90 oz. / sq. yard 100 percent FDA approved white polyurethane panel material is available when optimum compliance is needed. A vision area is unavailable with the 90 oz. material to maintain FDA acceptance. With either material, the panel maintains stability via spring steel stiffeners located in completely sealed panel pockets.

    VEHICLE RESTRAINTS

    Blue Giant vehicle restraints are simply designed, easy to use, and can apply up to 35,000 lb (15,875 kg) of restraining force to keep a truck or trailer stationed at the dock. They safeguard against unscheduled departures, trailer creep, and trailer walk, and require minimal maintenance.

    Blue Giant vehicle restraints service a wide range of carriers, including those with bent or damaged ICC bars, and may be interlocked with dock levelers for enhanced performance. Hydraulic, electric, and mechanical models are available to accommodate site and sustainability requirements.

    All vehicle restraints come standard with Blue Genius™ touch controls and an interior and exterior LED lights communication system.

    • Hydraulic
    • Electric
    • Mechanical
    • Wheel Chocks

    DOCK LEVELERS

    Blue Giant dock levelers have been setting the industry standard for safety, durability and ease of operation since 1963. Designed for demanding applications, each dock leveler offers exceptional performance, reliability, and safety levels as well as a low lifetime cost of ownership.

    With pit style, vertical storing, and edge-of-dock models in our equipment portfolio, Blue Giant has a solution for any type of freight-handling need.

    • Pit Style
    • Vertical Storing
    • Edge-of-Dock
    • Xtra Dock Safety

    MECHANICAL

    Blue Giant Mechanical Dock Levelers combine an innovative hold-down system with a simple design that is both ergonomic and easy to use. These solidly built dock levelers present a cost-effective and reliable solution for basic applications.

    PRODUCT HIGHLIGHTS
    • Yieldable lip safely collapses if struck while extended
    • Heavy-duty main lift springs have a lifetime warranty
    • Mechanical fall-safe legs limit platform free-fall
    • Ergonomic soft-pull chain requires only 3 lb of force to deploy the deck
    • Maintenance strut supports both deck and lip for safe under-deck maintenance and inspections
    • Mechanical Dock Leveler
    • I-Beam Mechanical Dock Leveler

    HYDRAULIC

    Blue Giant hydraulic dock levelers are powerful units with one of the highest performance standards in the industry. These premium level units come standard with a single push button control for sequenced deck and lip operation.

    PRODUCT HIGHLIGHTS
    • Operated via a remote-mounted single push-button control for sequenced deck and lip operation
    • Operating range is up to 12″ (305 mm) above and 12″ (305 mm) below the dock leveler
    • Comes complete with a 1HP, Totally Enclosed Non-Ventilated (TENV) power pack system
    • A hydraulic velocity fuse that limits the loaded ramp’s free fall to within 3″ (76 mm)
    • Yieldable lip safely collapses if struck while in the extended position
    • Full operating range toe guard protection (painted safety yellow as specified by ANSI Z535.1)
    • Stationary side toe guards with high-visibility OSHA safety striping
    • The integral maintenance strut supports the deck and lip for safe maintenance and inspection procedures
    • Hydraulic Dock Leveler
    • Heavy Capacity Hydraulic Dock Leveler
    C.H.I overhead doors logo

    Commercial Garage Doors

    C.H.I. understands the importance of owning a Commercial Garage Door that is not only functional but also able to withstand the daily operations in the toughest industrial environments. We offer a wide selection of insulated and non-insulated commercial upward acting doors to fit your exact specifications.
    commercial insulated sandwich overhead garage doors southeastern ma

    Commercial Insulated Sandwich Doors

    white overhead garage doors southeastern ma

    Ribbed Steel Pan & Pan-Insulated Doors

    commercial fire station overhead garage doors southeastern ma

    Aluminum Full-View Doors

    Rolling Steel Garage Doors

    C.H.I. manufactures industrial Rolling Steel Doors, Coiling Fire Doors, Fire Shutters, Counter Doors, Grilles and Side Folding Grilles to exceptional standards of quality. Our promise is to deliver affordable, owner-friendly Rolling Steel Doors that are reliable, architecturally pleasing and simple to maintain.

    Commercial tall overhead door for loading dock

    Rolling Service Doors

    Commercial counter shutters for businesses

    Counter Shutters

    commercial overhead door company in Massachusetts Rhode Island

    Rolling Fire Doors

    Garage door shutters commercial installation

    Fire Counter Shutters

    Gated overhead door for stores in MA

    Coiling Grilles

    Commercial overhead doors with security features

    Side-Folding Grilles & Closures

    About Raynor

    Whether it’s a steel or aluminum garage door for your home, or a sectional or rolling door for a commercial or agricultural application, Raynor products are crafted for dependable long-lasting performance.

    mp_ControlHoist_Standard_2

    ControlHoist™ 2.0 Standard

    The ControlHoist 2.0 Standard is medium-duty, belt-drive operator, designed for high cycle applications and use on standard to larger size sectional doors, rolling door and grilles. Innovative features, along with durable mechanical design, offer a consistent and reliable performance day in and day out.

    mp_ControlHoist_basic_2

    ControlHoist™ 2.0 Basic

    The ControlHoist 2.0 Basic is a ½ horsepower, belt-drive operator, perfect for operating smaller sized sectional doors, rolling doors and grilles. This entry level unit is still loaded with innovative features along with a durable construction that is suitable for most commercial applications.

    mp_thermaseal_TM175

    ThermaSeal™ TM175

    With a 16.4 R-value, this benchmark product provides Raynor reliablity and durability to meet or exceed the requirements of daily use. This garage door is offered with the widest selection of quality features and options for the most common product applications.

    mp_duracoil_Standard

    DuraCoil™ Standard

    Rugged DuraCoil service doors, with aluminum, steel or stainless steel slats, are made to last. Every DuraCoil door is built for superior performance. When you want the best, specify DuraCoil.